Introduction
The only thing louder than a construction site under full operation is the endless hum emitted by a generator เครื่องปั่นไฟ. That generator is the lifeblood of any job where more than just manpower is necessary to get the task done. But with every make and model and specific generators to handle everything from a smartphone charging station to a sub shop, how will you ever know which generator to make your generator? Fear not, construction professionals. Before you put pen to paper on that generator rental agreement, use this easy guide to give you an exact answer for what generator to use for your construction site.
Evaluate your power requirements:
Before evaluating generator เครื่องปั่นไฟ features, it is important to assess your power needs. Start by making a list of all the equipment you plan to operate at the same time. Take note of the starting and running wattage of your prospective tools, as these will play into what generator size you need (this information can usually be found in the owner’s manual). Starting Wattage is the wattage required to start a tool or appliance with an electric motor, this is the starting load that gets applied to your generator. Once that tool or appliance is started the running wattage is the wattage consumed to keep the tool or appliance running
Fuel Type
A generator can be powered by a variety of different methods. Some methods are more advantageous than others. Or course each method has its own set of advantages and disadvantages, and both could be different. Diesel has become a very popular method of fuel. Diesel is very fuel efficient, and will oftentimes outlast the same amount gasoline.Gasoline generators are more affordable and portable, but they are not suitable for heavy duty electrical work. Some run shorter periods of time on a tank of gas. Many people opt for propane generators because they burn cleanly and operate with little noise. Propane can be stored for years, so you can be prepared for a sudden power outage. Propane is not available everywhere; ogens may need to be stored.
Do your tools or machines use three phase or single phase power?
Most construction equipment will run on single phase power, so that is a good starting point. Many smaller homeowners type D.I.Y. tools will run on single phase power and the same goes for light commercial machines. Three phase power refers to three separate lines of electricity running into your job site, each are the same voltage but are out of phase with each other. Three phase power can run more heavy duty motors and tools. Now can residential or commercial equipment be built to run on three phase power, yes. Many larger table saws and other shop machines do run three phases. However, these tools use a power converter to convert from the three phase power down to single phase power so that’s why I stated that the tools are mostly single phase categorized. Also some wood working machines will actually accept either single phase or three phase power so you can decide which to run. Again I don’t know how many people are going to have a huge table saw, or three phase capable dust guard but I included it as well. Like I said in the background paragraph you can select 60hz output if you live in Central or South America. However, there is not 60hz-European size power, if you will.
Portable vs. Stationary Needs
Portable: Portable generators give you the flexibility to move them about the job site as needed. However, portable generators as a rule are smaller and have a smaller power output. Stationary: Valued for their large power capacities for larger scale projects or when power is needed to be supplied continuously, these types of generators are permanently installed and can be conveniently used in situations when there is no shortage of available space.
Factor in Noise Levels:
Construction activities are noisy by nature, but excess generator noise can disturb surrounding communities and violate noise ordinances. While this heavy-duty generator doesn’t bear up against the other models in this rundown, it could be the right choice for the user who has noise level concerns; it has the lowest decibel rating at 64-dB 23 ft., just above the level of a normal conversation. Also, remember to look for features that will help reduce noise, such as enclosures or mufflers, if Siteworks are located in neighborhoods or other noise-sensitive environments.
Safety First:
If you are near a job site please consider the safety of you and others around you. Certain safety features. They lists out essential safety features to look for in a generator are automatic voltage regulation (AVR) to protect any potentially harmful voltage output fluctuations being sent towards the sensitive electronic equipment it is powering, and it should be equipped with a ground-fault circuit interrupter (GFCI) to prevent a shock
Consider rental vs. purchase options
– Depending on the length of the project or in some cases even how often you may use the equipment, it is sometimes more economically feasible to rent the equipment rather than buy.
– For more frequent use or longer term projects it may make more economic sense to buy a generator for the project.
– Consider this because of rental charges, storage requirements and your need for future use on other projects.
Conclusion:
In conclusion, selecting a power generator for your construction project is a detailed process. Review the specifications required for your job and prioritize your needs and preferences to ensure you select the correct unit. Use the guide provided in this article to determine which type of generator will best suit your needs, then go out and see the units firsthand before you finalize your decision. Speaking with a qualified generator specialist will help you make the best choice for your specific construction requirements.
